Transmission & Bellhousing Kit TH350 to SB Ford

_x000D_
_x000D_

TCI Super StreetFighter Transmissions bridge the gap between the TCI StreetFighter series and full competition transmissions. This version (Part# 311005) is intended for normally aspirated vehicles powered by engines producing up to 600 ft lbs of torque.
_x000D_

_x000D_
Features & Benefits:

_x000D_
_x000D_

•Extreme performance clutches and nitrided steel plates for enhanced performance.
_x000D_
•Extra-wide powerbands, where available, provide greater torque capacity, and more positive shifts and band apply
_x000D_
•Larger diameter servos increase band pressure which means more force on flex bands
_x000D_
•New sprags/roller clutches, enhanced hard parts and improved lubrication. Includes a chrome-plated transmission pan with embossed TCI
_x000D_
•Increased thrust capacity and higher line pressure for extra firm shifts & greater torque capacity with less slippage

_x000D_
_x000D_

_x000D_

_x000D_
_x000D_

Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

_x000D_
_x000D_

SFI Bellhousing

_x000D_
_x000D_

Using the latest technology, RTS has come up with these Aluminium bellhousings. These Bellhousings are Certified flexplate shields and allow for special motor and transmission combinations to be easily mated together. RTS Bellhousings are manufactured from one-piece cast aluminum, making them 5 times stronger than stock bellhousings. They are capable of withstanding even the most severe tire shake, can fit under most stock floorboards.Meets all SFI 30.1 requirements.

_x000D_
_x000D_

_x000D_
• Small Block Ford 289, 302, 351W/C 

_x000D_

• SFI 30.1 Certified

_x000D_

• Works with OEM TH350 / Th400 Cases

_x000D_

• A356-T6 Cast Aluminum

_x000D_

• Precision Machined 

_x000D_

• 5x stronger than OEM

_x000D_

• Works with Most 11” and Smaller Torque Converters

_x000D_

• Requires Removal of OEM Bellhousing on OEM Cases

_x000D_

• Must use 164 tooth Flexplate 

_x000D_

_x000D_